The Paropy Image Trans Heat Transfer Paper is widely known as the premier brand in quality heat transfer paper. The excellent color vibrancy, soft hand feel, durability, fade resistance, peel resistance and crack resistance sets this transfer paper apart from others available in the market. Designed to transfer thin with virtually no visible background when imaged. Suitable for fabrics made of cotton, cotton blend, as well as synthetic fibers (polyester, nylon, etc.) including Lycra. Perfect for our entire line of heat press machines!
*Packaging may vary*
Includes:
- 50 sheets of Paropy Inkjet Light Pro
- 50 sheets of Paropy Inkjet Dark Pro
Tips and Tricks for the Best Result:
- Transfer paper is intended for use cotton, cotton blend fabrics, polyester, nylon and Lycra.
- Print with inkjet printer only.
- Set printer quality to normal to photo image quality. Over saturating the ink will cause ink bleed during launder.
- Do not press the material using a Teflon or non-stick sheet.
- Do not wash the heat pressed item for 24 hours after application.
- Do not dry clean.
- Keep transfer paper in moisture resistant protective sleeve when not in use.
The HPN MyExpert Support guarantee is our commitment to Life Time Technical Support. No matter where you are in your products life cycle, we will be here to provide support to your product and make sure you are fully covered.
Often imitated, never duplicated; our dedicated team of technicians are capable of providing support to your product at any point of its life. Whether it be during the setup process or even years down the line where troubleshooting may be required, they'll have your back and provide a solution.
Our MyExpert Support will always be there for you so you can purchase with confidence!
Paropy INKJET LIGHT PRO Heat Transfer Paper Care & Instructions
Print: Mirror
Temperature: 350°F (175°C)
Time: 20 sec.
Pressure: Heavy
Peel: Warm
Wash Temp: 105°F (40°C)
*We do not recommend using a Teflon or non-stick sheet when pressing this material*
White or Light Colored
- 100% Cotton
- 100% Polyester
- 50/50 cotton/poly (Some polyester garments may experience dye migration, prior testing should be conducted)
Accessories Required
Computer, Inkjet Printer, Heat Press
Printable side
The printable side (white matte coated side) where film peels off.
Trimming Your Image
The paper has a transparent polymer background. However, it is recommended you trim close to your image to reduce the polymer background even more. The trim does not need to be accurate. It is recommended to trim roughly 0.5 - 1.0 inches around your image.
Pressure Settings
To ensure that the coating has properly fused with the fabric, we recommend using maximum pressure. If this paper is applied with inadequate pressure, the transfer will not wash well.
Peeling
This paper is to be peeled hot. Peeling should occur immediately after pressing. Also, if you have difficulties peeling the backing off the shirt, while the fabric is hot, gently tug on the sides of the shirt. The backing will "pop" right out.
Wash Instructions
Wait 24 hours before washing. Machine wash using mild detergent. Do not use bleach or other aggressive cleaning agents. Cannot be dry cleaned. Wash temperature cannot exceed 105°F. To increase color vibrancy, it is recommended to iron the image after each launder.
Storage
Inkjet Light Pro has an indefinite shelf life when stored at room temperature. Keep away from direct heat, sunlight and humidity.
Paropy INKJET DARK PRO Heat Transfer Paper Care & Instructions
Print: Right Reading on Matte Side (Photo/Best Quality recommended)
Temperature: 375°F (190°C)
Time: 25 sec.
Pressure: Medium
Peel: Cold
Wash Temp: 105°F (40°C)
Shirt Colors: Light or Dark Colored Fabrics
*We do not recommend using a Teflon or non-stick sheet when pressing this material*
- 100% Cotton
- 100% Polyester
- 50/50 cotton/poly (Some polyester garments may experience dye migration, prior testing should be conducted)
Accessories Required
Computer, Inkjet Printer, Heat Press. Cutter/Plotter Optional.
Printable side
The printable side (white matte coated side) where film peels off.
Cutting Notes
You should always test cut prior to any production run. Remember cutter settings will need to be adjusted as your blade ages. For optimal cutting and weeding, maintain a line thickness of at least 1/8” for lettering & logos.
Care Instructions
Wait 24 hours before washing. Machine wash using mild detergent. Do not use bleach or other aggressive cleaning agents. Cannot be dry cleaned. Wash Temperature cannot exceed 105°F
Storage
Inkjet Dark Premium has an indefinite shelf life when stored at room temperature. Keep away from direct heat, sunlight and humidity.
You may also like
